Showing posts with label best camcorders with mic input. Show all posts
Showing posts with label best camcorders with mic input. Show all posts

Friday, April 4, 2014

Best camcorder with an external mic input?




a_mckenzie


Hey So I'm looking at buying a camcorder. But I need one with and external 1/16" jack so I can record myself playing bass guitar and so It will look and sound clear. My price range is anwhere from $100-$180


Answer
There is no camcorder with a 1/16" mic jack.

If a consumer grade camcorder has an audio-input, it will have a 1/8" (3.5mm) input. Same with dSLRs that have a mic jack and happen to capture video as a convenience feature.

The Kodak Zi8 has audio-in. It does not have manual audio control... so don't play too loud.

For "clear" video images with low-end camcorders, be sure turn on LOTS of lights - a BRIGHT worklight or two (or three) from the hardware store will work well... pocket cams and entry-level consumer cams have small lenses and imaging chip - low light video capture will result in grainy video.

camcorder+external mic input.?




Samir


i like to record concerts but my 600d i a little enoying during a concert so i'm looking for a cheap camcorder wit an aperture of 2 or 1.8 or lower doesn't have to be hd. must have atleat 3 hours of battery and externalmic input.


Answer
Hi Samir:

You didn't state a budget (I'll assume UK pounds sterling, since you post from the Y!A UK site), and I'll assume your Samsung camcorder you mentioned in an earlier post doesn't have external mike input.

You have a wide variety of decent camcorders to pick from, since you aren't limiting your choice to HD-only models. For long battery life, I'd recommend a Canon or Sony camcorder (not a DSLR) which accept large "hi Amp-Hr rating" battery packs on the back. (The longer runtime batteries stick out more than the "stock" ones.) And to save money, look for a good used or refurbished Standard Def MiniDV tape model, like one of the Canon ZR-series (or even an old HV-10/-20/-30 which also shoot in HD). You can still shoot 16:9 widescreen in standard def with most good models, and you get your external mike input, if you pick the right model #. You'll get better PCM audio and lower-compression video with MiniDV tape format, and lots longer recording time than your Canon 600D can shoot without shutting down.

I've have good luck on eBay with used Canon & Sony camcorders (typically well-under $100 USD), and even got some good 2200+ mAh battery packs with some.

You won't find anything brand-new with decent runtime, fast lens, nor large-capacity battery pack option that's "cheap", unless you find a close-out from an online dealer for a discontinued model, or a factory refurbished bargain.

hope this helps,
--Dennis C.
 




Powered by Yahoo! Answers

Sunday, December 8, 2013

connecting a studio or condenser mic to a camcorder?

best camcorders with mic input on Best Hd Camcorder With Microphone Input
best camcorders with mic input image



killyouing


I am wanting to connect my studio mic (which requires phantom power) to my camcorder mic input so I can have better sound quality. Will doing that damage the camcorder or the mic at all? The camcorder is a Canon Vixia hf100 if that makes any difference. Thanks in advance!


Answer
A pro-grade "studio" condenser mic will use an XLR connector. The easiest way to do what you want will be to use aXLR adapter like a BeachTek DXA-6 or juicedLink CX231 that can also provide phantom power. Then, the XLR adapter plugs into the Canon FS100's 1/8" (3.5mm) stereo audio-in jack.

The good news is that these XLR adapters also have manual audio control - which the FS100 does not have. If you are using a single mic, be sure to put the "M"ono/"S"tereo switch on the XLR adapter in "M"ono mode. If it is in "S"tereo mode, only the right audio channel will be recorded in the camcorder.

Using a 1/8" cable tail adapter to XLR won't work because it does not carry phantom power.

The USB jack on the FS100 will not support any mics that use a USB cable. That connection is used ONLY for transferring video and stills OFF of the camcorder memory. Not for external audio connection.

How to use a boom mic without having a mic input in my camcorder?

Q. Hello. I am an about to work on a film using a camcorder. There isnt a mic input in my camera. i want better sound quality so my actors dont have to yell their lines. How can i do so? please help. I dont have the kind of money to buy a new camcorder. thank you :) <3


Answer
You use a separate audio recorder, like a Zoom H1 ($99.00). You can even use another video camera to pick up the audio (if you place it near your talent and out of camera sight). In fact just about all film makers use a field recorder and mics. The Zoom H1 is about your least expensive audio recorder to get decent sound. Use a clapper board (or clap your hands in front of the camera) to 'mark' your audio/video sync spot which you'll match up when you edit your film.




Powered by Yahoo! Answers

Monday, November 4, 2013

connecting a studio or condenser mic to a camcorder?

best camcorders with mic input on Sony HD Camcorder with mic input
best camcorders with mic input image



killyouing


I am wanting to connect my studio mic (which requires phantom power) to my camcorder mic input so I can have better sound quality. Will doing that damage the camcorder or the mic at all? The camcorder is a Canon Vixia hf100 if that makes any difference. Thanks in advance!


Answer
A pro-grade "studio" condenser mic will use an XLR connector. The easiest way to do what you want will be to use aXLR adapter like a BeachTek DXA-6 or juicedLink CX231 that can also provide phantom power. Then, the XLR adapter plugs into the Canon FS100's 1/8" (3.5mm) stereo audio-in jack.

The good news is that these XLR adapters also have manual audio control - which the FS100 does not have. If you are using a single mic, be sure to put the "M"ono/"S"tereo switch on the XLR adapter in "M"ono mode. If it is in "S"tereo mode, only the right audio channel will be recorded in the camcorder.

Using a 1/8" cable tail adapter to XLR won't work because it does not carry phantom power.

The USB jack on the FS100 will not support any mics that use a USB cable. That connection is used ONLY for transferring video and stills OFF of the camcorder memory. Not for external audio connection.

How to use a boom mic without having a mic input in my camcorder?

Q. Hello. I am an about to work on a film using a camcorder. There isnt a mic input in my camera. i want better sound quality so my actors dont have to yell their lines. How can i do so? please help. I dont have the kind of money to buy a new camcorder. thank you :) <3


Answer
You use a separate audio recorder, like a Zoom H1 ($99.00). You can even use another video camera to pick up the audio (if you place it near your talent and out of camera sight). In fact just about all film makers use a field recorder and mics. The Zoom H1 is about your least expensive audio recorder to get decent sound. Use a clapper board (or clap your hands in front of the camera) to 'mark' your audio/video sync spot which you'll match up when you edit your film.




Powered by Yahoo! Answers

Saturday, August 3, 2013

What High Definition Camcorder should I get?

best camcorders with mic input on Electronics Plus - Hard to find parts and accessories, available and ...
best camcorders with mic input image



mikenorton


I will be setting up a small studio with green screen and need to buy a high def camcorder. What I need is bang for my buck and good Video quality with a good lens. Big and bulky is not a problem.

Also with the ability to accept an external mic input.

Any ideas?



Answer
One thing with making a good chroma-key is the necessity to have as little compression as possible. Stepping up from HDV into higher-quality HD formats such as Panasonic's P2 and Sony's XDCam might be something to consider. Once you get into that price range, mic inputs are just automatically part of the package.

Lighting, of course, is also incredibly important - have to get that green to be as consistent as possible.

Of course, the concern here is budget. Not sure what your range is.

Best MiniDV Camcorder with Mic Input Jack?




Brice D


I'm looking for a digital camcorder that has the following features:

* mini-DV format
* microphone input jack
* video light
* image stabilization
* price in the $300-700 range

It seems really hard to find something current that has a microphone input. We are using this for interviews, so the sound quality is important and having a mic input seems to be the best way to cover this base.

Thanks for your thoughts and input.



Answer
Any gain to the quality of the interview provided by the ext mic will be lost if you use an on-camera light and electronic IS. A light on the camera is bad for two reasons. first it will give the interviewee the "deer in the headlights" look, not very complimentary. Second it will draw so much power off the battery that it will limit your shooting time between battery charges to a few minutes. Get a plug in floor lamp from Wal-mart or a campers lantern if you are mobile. The way to stabilize the camera is with a tripod, then you can walk away from the camera and be able to hold that ext mic you feel is so important. Unless you are interviewing professional media types, they won't be comfortable holding a mic.




Powered by Yahoo! Answers

Friday, July 19, 2013

How to get rid of ringing on a mic connected to a camcorder?

best camcorders with mic input on Panasonic PV-GS250 3.1MP 3CCD MiniDV Camcorder w/10x Optical Zoom ...
best camcorders with mic input image



AngusYoung


I have an FS200 canon camcorder with a mic input. when i play back the footage there is a loud ringing noise. how do i get rid of this.


Answer
just to be sure you are not falling into that trap.
yes that canon trap
you know the one where they double up their headphone socket with video/audio out

the default is for the socket to be INPUT not output to headphones.

it is really really really really annoying!

you have to set it in the menu as a headphone socket.

============================================
i hope that wasnt it, but you will surely get that one sooner or later,
oh and by the way it gets set back to the default every time it auto-off's itself
and thats another annoying canon trap as well.
=====================================

i have used a MIC pre-amp for years with an older canon and it improves the sound
no end and i use it for near broadcast quality. get yourself a pre-amp
i use a beachtek dxa-2 an older version than the current one
its a bit pricey but there are lots of other makes that do the job too.
it takes XLR mics or smaller models
i use a broadcast quality tie-clip one from Audio technica the 803b
and with the volumes all in the middle it gives really nice quality

anyway i cant really answer why you have the noises unless youve fallen into the canon trap.

good luck

Whats a nice Camcorder to buy, im looking for quality and features?




corebor


Im looking for a new Camcorder, one with a mic input, i can probably go up to 500$.


Answer
I suggest Canon FS11 Flash Memory Camcorder with 16GB Internal Flash Memory and 48x Optical Zoom.
- Widescreen HR recording
- 2.7-inch widescreen LCD
- USB 2.0 compatible for fast file transfer
- a microphone terminal for attaching an external microphone
http://www.amazon.com/gp/product/B00114LG7A?ie=UTF8&tag=computer0bd-20&linkCode=as2&camp=1789&creative=390957&creativeASIN=B00114LG7A




Powered by Yahoo! Answers